Electronic engineering designed to be manufactured.

We design custom hardware, firmware and software, with production in mind from the very first idea.

Tell us about your project See what we design

Every design starts by thinking about how it will be manufactured, tested and maintained throughout the product's entire life.

Everything that goes inside an electronic product.

Choose an area to see how we work.

From schematic to manufacturable board.

We design the electronics and the board with an eye on how they will be assembled, tested and supplied.

  • Schematics and PCB design
  • Design for manufacturing (DfM)
  • Redesign and management of component alternatives
  • Component life cycle control

Firmware tailored to the hardware.

We write the software that makes the product run, without using hardware resources that aren't needed.

  • Firmware in C and C++ for embedded systems
  • Real-time operating systems (RTOS)
  • Cloud-connected applications
  • Secure development and encryption in hardware and software (CRA)

Linux as the foundation of the product.

We develop Linux-based embedded systems, with the hardware and software designed together.

  • Embedded Linux systems on custom hardware
  • Hardware and software developed together
  • Network- and cloud-connected applications

Programmable logic and digital signals.

For applications that need speed and flexibility, we develop with FPGAs and digital signal processing.

  • FPGA design
  • Digital signal processing (DSP)
  • Rapid logic prototyping

Artificial intelligence on the device itself.

We have been designing products with Edge AI for more than five years: the model runs on the device, not in the cloud.

  • Processors optimised to run AI models
  • Lower latency and less bandwidth usage
  • Hardware sized for the model

End-to-end connected products.

We integrate the communications each product needs, from short range to long distance and low power.

Wi-FiBLE (Bluetooth)NFCLTE and 5GLoRa (LoRaWAN, Meshtastic…)Zigbee

How we run a project.

From the first conversation to after-sales service, with the same team.

  1. 01

    Concept

    We understand your goals and requirements.

  2. 02

    Design

    Custom hardware, firmware and software.

  3. 03

    Prototype

    Working boards and 3D enclosures.

  4. 04

    Industrialisation

    DfM, EMC and quality control.

  5. 05

    Production

    Full traceability on every board.

  6. 06

    Life cycle

    Obsolescence, defect and lead-time alerts.

Technologies we work with.

  • STM32
  • ARM Cortex
  • FPGA
  • DSP
  • Linux
  • FreeRTOS
  • C and C++
  • Python
  • Bluetooth LE
  • Wi-Fi
  • LoRa (LoRaWAN, Meshtastic…)
  • LTE and 5G
  • NFC
  • Schematics
  • PCB design
  • Firmware
  • Embedded Linux
  • Edge AI
  • 3D prototyping
  • DfM
  • Component life cycle

What we design, we also manufacture.

When the design is ready, it moves to the assembly plant without changing teams: from prototypes to high-volume production, with inspection and traceability.

See production

Do you have an idea or a design that needs engineering?

Tell us what you need and where you are with it. Our engineering team will get back to you.

Tell us using our form